MechSimulator

Excavator Simulator

Dig, swing & load a truck with real hydraulics • Lift chart & tipping • Parts library & build — Simulate • Explore • Practice • Quiz

Mode
Display
Pump
0 bar
Engine
0 %
Bucket
0 kg
Stability
0 %
Cycle
— s
Output
— m³/h

Reach outPull inSwing LSwing R
W A S D
L
Tracks
R
RaiseLowerCurlDump
I J K L
Left stick: reach out / in, swing. Right stick: raise / lower, curl / dump. Keys W A S D and I J K L (Shift: fine), tracks Q/Z E/C. Or drag the bucket.

Task

Machine

Engine speed dial10
Work mode
Joysticks

A game controller works too: left and right sticks, the D-pad drives the tracks, the shoulder buttons and triggers work each track on its own, A runs Show me.

Live hydraulics

Rated figures

User Guide — Excavator Simulator
1 Overview

A working crawler excavator you drive yourself. It is a representative machine of its size class, not any maker’s model: four sizes from a 1.8-tonne mini to a 36-tonne large machine, the 22-tonne machine being the default. Everything it does comes from its physics: the boom, stick and bucket are a real linkage moved by hydraulic cylinders; the pumps share their flow and power between the functions; soil resists the teeth; the machine tips if you ask too much.

Three views: Machine (operate it), Parts library (every part on its own) and Build (assemble it). Each works in 2D, a side view of the plane the boom works in drawn to scale, or 3D, which opens by default on a computer or tablet.

2 Driving it: joysticks, your hand, a gamepad
  • Drag the two on-screen joysticks, or use the keyboard: W A S D is the left stick and I J K L the right one.
  • Controls (the Controls button under Show me, or the Joysticks pills in the panel) offers four ways to drive. The labels round each joystick always show what each direction does.
  • Easy (the default, made for play): the bucket follows the sticks. Left stick up/down reaches the bucket out and pulls it in, left/right swings; right stick up/down raises and lowers the bucket, left/right curls and dumps it. The machine moves its boom and stick together so the teeth go straight the way you push and the bucket keeps its angle to the ground. Let go and it stops. When you lower or pull in an empty bucket it tips its teeth down to dig, so the teeth meet the ground first, not the heel; a loaded bucket keeps its angle. To dig: lower the bucket into the ground, pull it in, curl it, raise it well above the truck (dumping swings the teeth down), swing to the truck, dump.
  • Direct (a game mode, one part per direction): left stick up/down moves the stick out/in, left/right swings; right stick up raises the boom and down lowers it, left/right curls/dumps the bucket.
  • In both game modes the sticks answer a small push: a round dead zone, a gentle curve and a correction for the valve’s own dead band, so half a push gives about half the speed, and a push that is mostly up does not also swing the machine.
  • ISO pattern (the default on most real machines): left stick left/right swings, forward/back moves the stick out/in; right stick forward/back lowers/raises the boom, left/right curls/dumps the bucket. SAE / backhoe swaps boom and stick between the hands. The labels round each joystick always show what it does. Every direction moves the links as on a real machine: stick forward swings the stick out and the teeth away from you, back crowds it in towards the cab; boom forward lowers the boom, back raises it; right stick left curls the bucket (teeth up and in), right dumps it; left stick left turns the upper anticlockwise seen from above, so the boom swings to your left.
  • Solid steel: the boom, stick and bucket cannot pass through the tracks, the cab, the boom or the truck, and the machine cannot drive or swing into the truck. Hit something and that movement stops where the steel meets: a cylinder pushing into it goes to its relief pressure, a swing stops dead, the tracks stall, a banner names what met what, and you hear (and, on a gamepad that can, feel) the impact. The other movements keep working, so you can slide the bucket up a wall or lift it clear. Swinging a low bucket into the truck is the classic loading mistake: lift above the rim first. In Load the truck, a hit costs a star, and the driver will not drive off while your bucket is in the way.
  • The levers are proportional: a little movement gives a little flow. Each valve has a small dead band and a progressive notch, and its spool takes about a tenth of a second to follow the lever, so small, smooth movements are how you grade a surface or set a load down. On the keyboard, hold Shift for fine control (40 % lever).
  • Tracks: the two travel levers beside Show me (L and R) drive each track on its own, forward or back, as the levers or pedals in a real cab do: one track for a pivot turn, both opposite for a spin turn. The keys are Q/Z for the left track and E/C for the right. The arrow buttons and arrow keys are shortcuts: ↑/↓ both tracks, ←/→ a spin turn. Lo / Hi (or H) is the travel speed; in a hard turn the motors shift themselves back to low.
  • Lock (or X) is the hydraulic lock, the safety lever by the operator’s seat: while it is on, no lever moves anything.
  • Show me a dig cycle lets the machine dig, swing, dump into the truck and come back by itself, using exactly the same levers you have. Touch any control to take over.
  • Take hold of the machine: drag the boom or the stick and it turns on its pin; drag the bucket and the teeth follow your hand while the bucket keeps its angle; drag the gold ring on the bucket linkage (or scroll over the bucket) to curl it; drag the cab sideways to swing. Your hand sets a target and the hydraulics drive to it at their own speed, so a bucket deep in clay stalls under your hand as it would on the levers. In 2D, click the top view to swing over that spot; in 3D, click the ground.
  • A gamepad works too: the two sticks are the joysticks, the D-pad drives the tracks, the left bumper and trigger work the left track and the right ones the right track, and A runs Show me.
  • The speaker button turns the engine, pump and relief-valve sound on or off; the square button fills the screen with the machine (Esc to leave).
3 The engine, and working in the ground
  • The engine speed dial runs from 1 (low idle, 1,000 rpm) to 10 (rated speed). The pumps turn with the engine, so a lower dial gives less flow and slower movements, and less power to share between them. The work mode caps the power the pumps may take: P all of it, S 90 %, E 80 % with the engine held to 90 % speed. Auto-idle drops the engine to idle after 4 seconds with every lever centred, and brings it back the moment you touch one.
  • Travel takes pump flow too. Drive while you dig and both slow down; a spin turn takes far more pressure than driving straight, because the tracks have to skid sideways.
  • How the bucket meets the soil depends on which way you move it. Teeth taking a slice with the open mouth leading cut, and fill the bucket. Teeth pushed along their own line penetrate, a little harder. The back of the bucket pushed into the ground bulldozes, about five times harder, and fills nothing. Drawing the teeth back out along their line is easy. A full bucket pushes its heap ahead of it, and a bucket buried deeper than its mouth drags its whole body through the soil.
  • Push the boom down on the ground and the machine rises on its bucket, pivoting about the far edge of the tracks, as far as 12°: the soil can only push back as hard as the machine’s own weight holds it down. Raise the boom and it settles back before the bucket leaves the ground.
  • You cannot swing with the bucket in the ground unless the soil is soft and the bucket shallow: the side plates bear on the soil and hold the swing at its relief pressure. Lift clear first.
  • When a cylinder stalls against the soil it holds at relief, steadily, and the soil pushes back only as hard as it is pushed: a stuck bucket stays where it is.
4 Tasks
  • Load the truck: fill the truck parked on your right. The panel counts passes, payload, cycle time and output per hour. The clock starts with your first bite; a full truck scores up to three stars against a good operator's pass time, and your best time is kept for each machine and soil. Send the truck away and the next one backs in.
  • Free dig: no truck. Dig and dump wherever you like; the spoil heaps up where it falls.
  • Dig a trench: set the depth you want; the panel shows how deep the trench is under the bucket and turns green when you reach the line.
  • Lift test: a concrete block hangs from the bucket pin. Set its mass, lift it, reach out and swing over the side: the panel shows the ISO 10567 rated capacity at the bucket pin, what limits it, and your stability margin. Go past it and the machine starts to tip.
5 What you are seeing
  • Key results: the pump pressure, how much of the engine’s power is in use, the soil in the bucket, the stability margin (100 % is standing still empty, 0 % is on the point of tipping), the last cycle time and the output per hour.
  • Gauges (in 2D) and the Live hydraulics list: each cylinder’s pressure and force, the flow it gets, and the power lost in throttling and over the relief valve. A function that turns red has stalled: the soil needs more than relief pressure can give.
  • The chart under the drawing shows the pressures against time, the classic working range diagram, or the lift chart with the bucket pin’s current position on it.
  • Display Controls switch the part names, pressures, force arrows and centre of gravity, the working range and the gauges on and off.
6 Parts library and Build

The Parts library lists 22 parts in four groups (undercarriage, upper structure, hydraulic system, front attachment). Pick one to see it on its own, in a 2D drawing or in 3D, with what it does, how it works and its figures for the size you have chosen.

Build starts from an empty stand. Press a card in the tray to fit that part; a part fitted too early is refused with the reason (the tracks need the sprocket, idler and rollers first; the upper frame covers the centre joint, so the joint must go in before it). Hint outlines the next part, Fit next part does it for you, and the assembly-order switch numbers the tray. Start & test runs every function and reports what works and what is missing, including whether the machine stays upright: without its counterweight it tips over the side reaching out with a full bucket.

7 Explore, Practice and Quiz

Explore has 19 cards in four groups (the machine, hydraulics, forces and stability, operating and output), most with a worked example on the 22-tonne machine. Practice draws from 14 kinds of problem in your unit system. Quiz asks 8 questions from a pool of 22, with the options shuffled every time.

8 SI and Imperial

The SI / Imperial switch changes every readout, gauge, chart and practice problem: metres and feet, kilograms and pounds, kN and lbf, bar and psi, L/min and gpm, kW and hp, m³ and yd³. Your choice is remembered across the site.

9 What the model includes, and what it leaves out

Included: the full linkage kinematics (the bucket through its four-bar), cylinder forces by virtual work, load-sensing pumps with constant-power control and flow sharing, relief valves, swing torque and inertia, soil cutting resistance F = k·b·h by soil type, with stated multiples of it for penetrating, bulldozing, drawing out, pushing a full bucket and dragging a buried one, found from the motion the valves ask for so a stalled bucket holds steadily; the machine rising on its bucket about the far track edge; the side plates holding a swing; solid contact between the attachment, the undercarriage, the upper and the truck (each part a convex solid taken from its drawn outline, stopping its movement at the touching point); proportional valves with a dead band, a progressive notch and a 0.1 s spool lag; cylinder end cushions; the engine dial, work modes and auto-idle; travel motors that share the pumps and shift themselves to low; bucket filling, spilling and soil pushed aside; ISO 6015 digging forces, ISO 10567 lift capacity, and tipping about the real edge for any swing angle. The soil model is a single cutting coefficient with engineering multiples, not a soil-mechanics analysis; the tracks do not slip and the ground is level under them; cylinders and oil are treated as stiff, and the machine’s pitch on its bucket uses the moment balance square to the machine (accurate to 2 % at the 12° it may rise). It is a learning tool, not an operator certification trainer.

Excavator Simulator: How a Hydraulic Excavator Works

This free excavator simulator lets you operate a crawler excavator in your browser, in 3D or as a 2D side view, and see the engineering behind every move. Work the two joysticks to dig, swing and load a truck; the boom, stick and bucket move through their real linkage, the hydraulic pumps share their power between the cylinders, the soil pushes back on the teeth, and the machine tips if you reach too far with too much. When you want to know what something is, open the parts library, or take the machine down to its track frame and build it again.

The parts of an excavator

A crawler excavator has three main assemblies. The undercarriage is the track frame and carbody, with rollers, front idlers, travel motors driving the sprockets, and the track chains. The upper structure turns on a large ball bearing, the slewing ring: it carries the engine, the hydraulic pumps, the tank, the main control valve, the cab and the counterweight, and a centre joint on the swing axis passes oil down to the travel motors. The front attachment is the boom, stick (arm) and bucket, moved by two boom cylinders, a stick cylinder and a bucket cylinder. The bucket cylinder works through a side link and an H-link, a four-bar linkage that turns its short stroke into almost 200° of bucket rotation.

Excavator hydraulics: from the engine to the teeth

The diesel engine drives no wheel and no arm directly. It turns two variable-displacement piston pumps. The joysticks are pilot valves that move spools in the main control valve, and each spool sends oil to one side of a cylinder or motor. A cylinder’s force is its pressure times its area, F = p·A, and its speed is the flow divided by the area, v = Q/A, so the load sets the pressure and the pump sets the speed. The pumps limit their flow as pressure rises so that p·Q stays within the engine’s power, and a load-sensing system runs them just above the highest working pressure. Moving two functions at once costs energy: the lighter one throttles the difference away as heat. If the soil asks for more than relief pressure can give, the cylinder stalls and the oil goes over the relief valve. In the simulator, a deep cut in stiff clay does exactly that.

Digging forces, reach and size

Spec sheets give two digging forces, both measured at the tooth tip with one cylinder at relief (ISO 6015): the bucket digging force from the bucket cylinder and the smaller stick digging force from the stick cylinder, which acts round the longer radius from the stick pivot. The four machines in the simulator, worked out by its own model:

MachineOperating mass (t)Bucket (m³)Reach at ground (m)Digging depth (m)Bucket force (kN)Stick force (kN)Relief (bar)Ground pressure (kPa)
Mini excavator1.80.053.882.65141021025
Midi excavator8.00.306.604.51513727439
22-tonne excavator22.11.009.716.641389934349
Large excavator36.01.7011.567.9022816434357

Representative machines of each class computed by the simulator, not any manufacturer’s specification.

Why an excavator tips, and how to read a lift chart

An excavator balances on a tipping edge: the front idler when it works over the ends of the tracks, the track centre line when it works over the side. Everything behind the edge, above all the counterweight, holds it down; the attachment and the load in front of it try to tip it. The tracks are narrower than they are long, so the machine is much less stable over the side. A lift chart gives the load allowed at each radius and height of the lifting point. Under ISO 10567 each figure is the lesser of 75 % of the tipping load and 87 % of the hydraulic lift capacity. The 22-tonne machine’s chart from the simulator (tonnes at the bucket pin, bucket curled; * = limited by hydraulics, otherwise by tipping):

Height of bucket pin4.5 m front4.5 m side6.0 m front6.0 m side7.5 m front7.5 m side
+4.5 m——4.8*3.84.2*2.5
+3.0 m7.6*5.55.5*3.54.42.3
+1.5 m8.9*5.06.2*3.24.32.2
0 m (ground)9.2*4.76.03.14.22.1
−1.5 m8.7*4.76.03.04.22.1

Excavator controls: ISO and SAE joystick patterns

Two joysticks work four functions. In the ISO pattern, the left stick swings (left and right) and moves the stick (forward is out, back is in), and the right stick moves the boom (forward is down, back is up) and the bucket (left curls in, right dumps). The SAE or backhoe pattern swaps the boom and the stick between the hands. The simulator has both, plus two game modes for play: Easy, in which the bucket simply follows the sticks (up raises it, forward reaches out) while the machine coordinates the boom and stick, and Direct, one part per stick direction with up meaning up. The labels round each joystick change with the pattern. A good dig cycle overlaps the moves: crowd and curl to fill, boom up while swinging to the truck, dump, swing back while lowering.

Productivity: cycle time, fill factor and swell

Output is the heaped bucket volume times the fill factor times the number of cycles an hour: Q = q·K·3600/T. A 1.0 m³ bucket with a fill factor of 0.9 on a 20-second cycle moves 162 m³ an hour. Dug soil also swells: clay takes 30 to 40 % more room in the truck than it did in the ground, sand about 12 %. In Load the truck the simulator times each of your cycles and works out your output.

Who uses this simulator?

Students of mechanical and civil engineering, construction plant and heavy equipment courses, vocational and technical schools learning hydraulics, and anyone curious about how a digger works. It explains the machine rather than certifying an operator.

Explore Related Simulators

See one cylinder in depth in the Hydraulic Cylinder Simulator, draw whole circuits in the Hydraulic Circuit Simulator, follow the engine that drives the pumps in the Four-Stroke Engine Simulator, and see why oil pressure multiplies force with Pascal’s Law.

Frequently asked questions

Is there a free excavator simulator online?

Yes. This excavator simulator runs free in the browser with no download or sign-up. You work two joysticks with the mouse, the keyboard or a touch screen to dig, swing and load a truck, in 3D or as a 2D side view, and it also shows the hydraulics, the forces and the stability behind every move.

How does a hydraulic excavator work?

A diesel engine turns hydraulic pumps. The operator's joysticks move spools in a control valve that send oil to cylinders and motors: two boom cylinders lift the boom, a stick cylinder crowds the stick, a bucket cylinder curls the bucket through a linkage, a swing motor turns the upper structure on a slewing ring, and two travel motors drive the tracks.

What are the joystick controls on an excavator?

In the ISO pattern the left joystick swings the machine (left and right) and moves the stick (forward is out, back is in); the right joystick moves the boom (forward is down, back is up) and the bucket (left curls in, right dumps). The SAE or backhoe pattern swaps the boom and the stick between the hands.

What is the difference between bucket and stick digging force?

Both are measured at the tooth tip with one cylinder at relief pressure (ISO 6015). Bucket digging force comes from the bucket cylinder and acts round the bucket pin; stick digging force comes from the stick cylinder and acts round the stick pivot, a longer radius, so it is smaller. On a 22-tonne machine they are about 138 kN and 99 kN.

Why does an excavator tip over?

It tips when the moment of the attachment and its load in front of the tipping edge is greater than the moment of the machine's own weight, mostly the counterweight, behind it. The tipping edge is the front idler when working over the tracks' ends and the track centre line when working over the side, so an excavator is much less stable over the side.

How do you read an excavator lift chart?

Find the load radius (from the swing axis to the lifting point) across the top and the height of the lifting point down the side. The figure where they meet is the rated load, over the front or over the side. Under ISO 10567 it is the lesser of 75 % of the tipping load and 87 % of the hydraulic lift capacity.

What are the main parts of an excavator?

The undercarriage (track frame, rollers, idlers, travel motors with sprockets, track chains and shoes), the upper structure (slewing ring, centre joint, revolving frame, swing drive, engine, hydraulic pumps, tank, control valve, counterweight and cab) and the front attachment (boom, boom cylinders, stick, stick cylinder, bucket linkage, bucket cylinder and bucket).

Updated