Nuclear Fission Simulator
Watch U-235 split in 2D & 3D • mass defect & E = mc² • where the energy goes • Explore • Practice • Quiz
Display Controls
The nuclear equation
Mass before and after
Binding energy per nucleon
Where the energy goes
Fission problems
Answers within 0.5 % are marked correct (exact for mass and atomic numbers). Every number you need is in the question.
1 Overview
The simulator animates one nuclear fission from start to finish and does its energy accounting live from real atomic masses (AME2020) and half-lives (NUBASE2020). Choose a split with the buttons above the drawing: Ba-141 + Kr-92 + 3n, Xe-140 + Sr-94 + 2n or Ba-144 + Kr-89 + 3n, or U-238 + slow neutron to see why that nucleus does not split.
2 The seven stages
A fission plays in 7 stages: Approach (a slow neutron), Capture (U-236 forms, excited), Wobble (the liquid-drop vibration, with the strong force and the electric repulsion drawn as arrows), Split (scission, prompt neutrons and gamma rays), Repulsion (the fragments accelerate, with their real speed and energy), Heat (the fragments stop in the fuel and shake its atoms) and Decay (the beta-decay chains on a real-time scale). The U-238 path has 5 stages. Click a stage chip to jump to it; the card on the drawing explains it and states the real time scale.
3 Playing the animation
Use Play / Pause (or the space bar), ⏮ ⏭ (or the arrow keys) to step between stages, the slider to scrub, and ¼× to 2× for the speed. Every stage is slowed down enormously: the split itself takes about 10⁻²⁰ s, the decays take seconds to months.
4 2D and 3D
Both views draw the same 236 nucleons from one model, red protons and blue-grey neutrons, with free neutrons in gold. In 3D drag to turn, pinch or Ctrl + scroll to zoom. On a computer or tablet the page opens in 3D; on a phone it opens in 2D. Your choice is remembered.
5 The four panels
The nuclear equation shows the reaction with mass numbers and charges, checks both balance, and writes out the decay chains. Mass before and after weighs the reactants and products and turns the mass defect into energy with E = mc². Binding energy per nucleon plots the curve and marks uranium and the fragments, and shows the same Q from binding energies. Where the energy goes splits the total into the fragments, neutrons, gamma rays, beta particles and antineutrinos, and marks how much has been released at this moment.
6 Explore, Practice and Quiz
Explore has 16 cards in four topics: the nucleus, fission step by step, where the energy comes from, and after the split. Practice draws from 12 kinds of problem (balancing, Q from masses, joules, mass defect, binding energy, the energy split, fission rate, energy per gram, nuclear vs chemical, half-life). Quiz asks 10 questions from a pool of 20.
7 What is simplified
The nucleons are drawn as balls in a fixed packing; a real nucleus is a quantum system with no sharp positions. The energy shares of neutrons, gammas, betas and antineutrinos are typical values (Lamarsh & Baratta) scaled to each split’s own Q. The fission barriers (about 5.7 MeV for U-236 and 6.2 MeV for U-239) are approximate. The fragments’ separation and speed after the split are calculated from their Coulomb repulsion.
How Does Nuclear Fission Work?
Nuclear fission is the splitting of a heavy nucleus into two lighter ones. In a reactor the heavy nucleus is uranium-235, and the trigger is a slow neutron. This nuclear fission simulator follows one fission in seven stages: (1) a neutron with only 0.025 eV of energy drifts into a U-235 nucleus; (2) the strong force captures it and the new nucleus, U-236, is left with 6.55 MeV of excitation; (3) it vibrates like a liquid drop and stretches; (4) a neck forms and snaps — scission — leaving two fragments and two or three free neutrons; (5) the two positive fragments repel each other and fly apart at over 10 million metres per second; (6) they crash into the atoms of the fuel within about 8 micrometres, and their kinetic energy becomes heat; (7) the fragments, which have too many neutrons, beta decay over seconds to months, releasing more energy.
The Nuclear Fission Equation
The textbook example is ¹n + ²³⁵U → ²³⁶U* → ¹⁴¹Ba + ⁹²Kr + 3 ¹n. A nuclear equation must balance in two ways: the mass numbers (1 + 235 = 141 + 92 + 3 = 236) and the charges (0 + 92 = 56 + 36 = 92). Uranium-235 splits in hundreds of ways, usually into one fragment near mass 140 and one near 95. The table compares three splits the simulator animates, using AME2020 atomic masses.
| Split of n + U-235 | Mass defect | Energy at scission | Same, from binding energies | Later, from beta decay | Total |
|---|---|---|---|---|---|
| Ba-141 + Kr-92 + 3 n | 0.186022 u | 173.28 MeV | 173.28 MeV | 25.97 MeV | 199.25 MeV |
| Xe-140 + Sr-94 + 2 n | 0.198262 u | 184.68 MeV | 184.68 MeV | 23.51 MeV | 208.19 MeV |
| Ba-144 + Kr-89 + 3 n | 0.185808 u | 173.08 MeV | 173.08 MeV | 23.16 MeV | 196.24 MeV |
Where Does the Energy Come From?
Weigh everything before and after the split. Before: a neutron (1.008665 u) and a U-235 atom (235.043928 u), 236.052593 u in all. After: Ba-141 (140.914404 u), Kr-92 (91.926173 u) and three neutrons, 235.866571 u. The missing 0.186022 u — less than 0.08 % of the mass — has become energy: by E = mc², 0.186022 u × 931.494 MeV/u = 173.28 MeV, or 2.78 × 10⁻¹¹ J. The same number comes from the binding-energy curve: uranium-235 holds its nucleons with 7.59 MeV each, the fragments with 8.33 and 8.51 MeV each. The fragments are more tightly bound, and the difference in total binding energy is the energy released. This is not a chemical reaction: burning one carbon atom releases 4.08 eV, about 50 million times less than one fission.
Where Does the Energy Go?
For Ba-141 + Kr-92 + 3 n the simulator splits the 199.25 MeV total with the typical shares of a U-235 fission (Lamarsh & Baratta), scaled to this split’s own Q:
| Carried by | Energy | When | Becomes heat in the fuel? |
|---|---|---|---|
| Kinetic energy of the two fragments | 161.7 MeV | at once | Yes, within about 8 µm |
| Prompt neutrons | 4.8 MeV | at once | Yes, mostly in the moderator |
| Prompt gamma rays | 6.7 MeV | at once | Yes, in the reactor |
| Beta particles from the fragments | 7.7 MeV | seconds to months | Yes |
| Delayed gamma rays | 6.7 MeV | seconds to months | Yes |
| Antineutrinos | 11.5 MeV | seconds to months | No — they escape |
Momentum decides how the fragments share their energy: they fly apart with equal and opposite momenta, so the lighter Kr-92 takes 97.9 MeV and the heavier Ba-141 63.8 MeV. Completely fissioned, one kilogram of U-235 gives about 7.7 × 10¹³ J of heat, about three million times as much as a kilogram of coal.
Fission Products and Beta Decay
The fragments inherit uranium’s high ratio of neutrons to protons, too high for nuclei of their size. They become stable by beta decay, in which a neutron turns into a proton, an electron and an antineutrino: Ba-141 (half-life 18.27 min) → La-141 (3.92 h) → Ce-141 (32.505 d) → stable Pr-141, and Kr-92 (1.840 s) → Rb-92 (4.48 s) → Sr-92 (2.611 h) → Y-92 (3.54 h) → stable Zr-92. These decays are the radioactivity of spent fuel and the decay heat that a reactor must remove after it shuts down.
Why Uranium-235 and Not Uranium-238?
Neutrons pair up. U-235 has an odd number of neutrons, so the one it captures completes a pair and is bound with 6.55 MeV — more than the fission barrier of about 5.7 MeV. U-238 already has paired neutrons; the captured one adds only 4.81 MeV, below the barrier of about 6.2 MeV, so the nucleus gives the energy out as gamma rays and later beta decays: U-239 (23.45 min) → Np-239 (2.356 d) → Pu-239. That is why reactor fuel is enriched in U-235, and how reactors make plutonium.
Frequently Asked Questions
How does nuclear fission work?
A slow neutron is absorbed by a uranium-235 nucleus, which becomes an excited uranium-236 nucleus. It wobbles like a liquid drop, stretches, and the electric repulsion between its 92 protons tears it into two smaller nuclei, such as barium-141 and krypton-92, plus two or three free neutrons. The fragments fly apart at about 10 million metres per second and stop in the surrounding fuel, turning their kinetic energy into heat.
Where does the energy in nuclear fission come from?
The products of fission weigh slightly less than the neutron and the uranium-235 nucleus that went in. For barium-141, krypton-92 and three neutrons the missing mass is 0.186 u, and by E = mc² that is 173 MeV. The fragments are more tightly bound than uranium: their binding energy per nucleon is about 8.4 MeV against 7.6 MeV for uranium-235.
How much energy does one fission release?
About 200 MeV in total, or 3.2 × 10⁻¹¹ joules. Most of it, about 170 MeV, is released at once as the fragments fly apart; the rest comes over the following seconds to months as the radioactive fragments beta decay. That is about 50 million times the energy released by burning one carbon atom.
What is the nuclear fission equation for uranium-235?
A common example is ¹n + ²³⁵U → ¹⁴¹Ba + ⁹²Kr + 3 ¹n. The mass numbers balance (1 + 235 = 141 + 92 + 3 = 236) and so do the charges (0 + 92 = 56 + 36). Uranium-235 can split in hundreds of different ways; another is ¹n + ²³⁵U → ¹⁴⁰Xe + ⁹⁴Sr + 2 ¹n.
Why does uranium-235 fission but uranium-238 does not?
When uranium-235 captures a slow neutron, the neutron's binding energy gives the new nucleus about 6.5 MeV of excitation, more than the roughly 5.7 MeV fission barrier. When uranium-238 captures one, it gains only about 4.8 MeV, less than its barrier of about 6.2 MeV, so it emits gamma rays instead and later beta decays to plutonium-239.
Who Uses This Simulator?
High school students meeting nuclear fission and nuclear equations (NGSS HS-PS1-8, GCSE physics, AP Chemistry), A-level, IB and AP Physics students working with binding energy, mass defect and E = mc², first-year university physics and chemistry students, and teachers who need an animation that does the arithmetic in front of the class.
Selected References
M. Wang et al., The AME 2020 atomic mass evaluation, Chinese Physics C 45, 030003 (2021); F. G. Kondev et al., The NUBASE2020 evaluation of nuclear physics properties, Chinese Physics C 45, 030001 (2021); J. R. Lamarsh and A. J. Baratta, Introduction to Nuclear Engineering; N. Bohr and J. A. Wheeler, The mechanism of nuclear fission, Physical Review 56, 426 (1939); K. S. Krane, Introductory Nuclear Physics.
Explore Related Simulators
See how a power plant controls millions of these fissions a second in the Nuclear Reactor Simulator. Build nuclei proton by proton and see which isotopes are stable in Build Your Atom, and practise balancing equations in Balance Chemical Equations. For the energy that heat then becomes, follow the steam in the Rankine Cycle simulator.
Updated