MechSimulator

Polarization of Light Simulator

Malus’s law, polarizers & wave plates in 3D — Simulate • Explore • Practice • Quiz

Mode
Display Controls
Field
Scene

Σ Live equation — values from the set-up on screen
User Guide — Polarization of Light Simulator
1 Overview

The simulator is an optical bench: a light source, up to three filters (linear polarizers, quarter-wave plates and half-wave plates) that you can rotate, and a detector. The electric field of the light is drawn along the beam, the polarization at every stage is shown as seen looking into the beam, and the detector reading follows Malus’s law. It has four modes: Simulate, Explore, Practice and Quiz.

2 Getting Started

Pick one of the six experiments in card 1 beside the bench: Malus’s law, Polarization states, Three polarizers, Make circular light, Half-wave rotator, and Circular light + polarizer. Then change the source in card 2 and the filters in card 3. The highlighted filter is the one the chart under the bench follows; click a filter (or its row) to highlight it, and press ↻ Turn filter to rotate it slowly while you watch the detector.

The page opens in the 3D view on a computer or tablet and in the 2D view on a phone. The 2D | 3D switch is at the left of the bar under the bench, and the page remembers your choice. Add ?view=2d or ?view=3d to a link to open a particular view.

3 Simulate Mode
  • The source can be an unpolarized lamp, or a laser that is linearly polarized (set its axis ψ), circularly polarized (right or left) or elliptically polarized (set its orientation ψ and ellipticity χ). Set the wavelength (the beam takes its colour) and the irradiance I₀.
  • The filters: tick one to put it in the beam, choose Linear polarizer, Quarter-wave plate or Half-wave plate, and set its angle with the slider, the number box, or by dragging it on the bench in either view. A polarizer shows its transmission axis (solid gold line); a wave plate its fast axis (dashed blue line).
  • The field: the red lines are the electric field E at points along the beam, and the bright red curve joins their tips: a flat wave for linear light, a helix for circular light. Tick Magnetic field B in Display Controls to add B (blue), always at right angles to E. Unpolarized light is drawn as short wave trains of random orientation.
  • The strip under the bench shows each stage as you would see it looking into the beam (the field-tip path, a rotating arrow, ↻ or ↺ for the handedness, and the irradiance), and the chart of the detector reading against the highlighted filter’s angle.

In 3D, drag a filter to turn it in its own plane, drag anywhere else to orbit, and Ctrl + scroll (or pinch) to zoom. Bench, Side and Into beam move the camera. The drawn wave is far longer and slower than real light (550 nm light oscillates 5.5 × 10¹⁴ times a second), and the bench says so.

4 Explore, Practice & Quiz

Explore has sixteen cards in four groups: Polarization states, Laws & formulas, Applications and Common mistakes, each with a worked example. Practice mixes eight kinds of problem: Malus’s law, unpolarized light through two polarizers, three polarizers, finding the angle from the irradiance, Brewster’s angle, wave-plate thickness, the half-wave plate and the field amplitude. Quiz asks six questions drawn at random from a pool of twenty, with the options shuffled, and scores you with up to three stars.

5 Key Concepts

Malus’s law: I = I₁ cos²θ. In the Malus’s law experiment the lamp gives 100 W/m², the first polarizer passes half (50 W/m²), and an analyzer at 45° passes 50 × cos²45° = 25 W/m². The field amplitude follows from I = ½cε₀E₀²: 100 W/m² is E₀ = 274 V/m. The simulator works in SI units only, as optics is taught in SI everywhere.

Convention: angles are measured from the horizontal, anticlockwise as seen looking into the beam (from the detector towards the source). Right-handed light turns clockwise as seen looking into the beam (the optics convention of Hecht and Born & Wolf); engineers using the IEEE convention call it left-handed.

6 Tips & Other Features

Change the wavelength with a wave plate in the beam: plates are cut for 550 nm, so at 450 or 650 nm a “quarter-wave” plate no longer makes perfectly circular light. Σ Calculations opens the working for the set-up on screen; PNG or a right-click (long-press) saves the view or copies the readings. Pause wave freezes the field so you can look at it. A soft click marks every 15° while you turn a filter.

Polarization of Light — an Interactive 3D Simulation

Light is a transverse electromagnetic wave: its electric field E and magnetic field B oscillate at right angles to the direction it travels, and at right angles to each other. The polarization of light is the path the tip of the electric field traces in that transverse plane. This simulator puts a lamp or a laser, rotating polarizers and wave plates, and a detector on one optical bench, draws the field along the beam in 3D, and computes every reading with Jones vectors, the same method used in optics textbooks.

Linear, Circular and Elliptical Polarization

Any polarized beam can be split into a horizontal and a vertical component of the field. What matters is their amplitudes and how far apart they are in time (the phase difference δ):

StateComponentsField tip tracesThrough a polarizer at θ
Linearin step (δ = 0 or 180°)a lineI₁ cos²θ (Malus’s law)
Circularequal, δ = ±90°a circle (a helix along the beam)half, at every angle
Ellipticalany other pairan ellipsebetween the two extremes
Unpolarizedrandom, changingno fixed shapehalf, at every angle

Choose Polarization states and switch the source between Linear, Circular and Elliptical to see each shape drawn along the beam and in the strip under it.

Malus’s Law: I = I₁ cos²θ

A polarizer passes only the part of the field along its transmission axis, E cos θ. Irradiance goes as the square of the field (I = ½cε₀E²), so the light that gets through is I = I₁ cos²θ, where θ is the angle between the light’s polarization and the axis. Unpolarized light has no direction to measure θ from, so the first polarizer always passes exactly half.

Angle θ between light and analyzer0°30°45°60°90°
Fraction passed, cos²θ10.750.50.250
Lamp of 100 W/m² → polarizer → analyzer50 W/m²37.5 W/m²25 W/m²12.5 W/m²0

The Malus’s law experiment is exactly this set-up. Press Turn filter and the detector traces the cos² curve on the chart, with two bright and two dark positions in every full turn.

The Three-Polarizer Experiment

Two crossed polarizers (axes at 0° and 90°) let no light through. Put a third between them at 45° and light comes back: (I₀/2) × cos²45° × cos²45° = I₀/8. Adding a filter has let more light through, because each polarizer re-projects the field onto its own axis and gives the next one a component it can pass. In general the light through is (I₀/8) sin²2θ, largest at 45°.

Quarter-Wave and Half-Wave Plates

A wave plate is a thin slice of a birefringent crystal such as quartz or mica. Light polarized along its fast axis travels a little faster than light along its slow axis, so one component falls behind. A quarter-wave plate delays it by a quarter cycle and turns linear light at 45° to its axis into circular light; a half-wave plate delays it by half a cycle and mirrors the polarization about its fast axis, turning linear light by 2θ. Wave plates absorb nothing: their effect appears only in a later polarizer or in the shape of the field. A zero-order quartz quarter-wave plate for 550 nm is only about 15 µm thick.

Where Polarization Is Used

Who Uses This Simulator?

Students meeting polarization and electromagnetic waves in A-level, IB, AP Physics 2, CBSE and introductory college optics; instructors who want to show Malus’s law, the three-polarizer surprise and circular polarization in three dimensions instead of on a board; and anyone revising for a question on polarizers or wave plates.

Frequently Asked Questions

What is Malus’s law?

Malus's law gives the irradiance of linearly polarized light after a polarizer: I = I1 cos^2 theta, where I1 is the irradiance arriving and theta is the angle between the light's polarization and the polarizer's transmission axis. At 0 degrees all the light passes, at 60 degrees a quarter, and at 90 degrees none.

What is the difference between linear, circular and elliptical polarization?

In linear polarization the electric field oscillates along one fixed line. In circular polarization two equal field components are a quarter cycle apart, so the field keeps its length and turns once per period, tracing a helix along the beam. Elliptical polarization is the general case in between, where the field tip traces an ellipse.

Why does a third polarizer let light through two crossed polarizers?

Crossed polarizers at 0 and 90 degrees pass nothing. A third polarizer between them at an angle theta projects the field onto its own axis, giving the last polarizer a component it can pass. The light that gets through is (I0/2) cos^2 theta sin^2 theta, one eighth of the unpolarized lamp at theta = 45 degrees.

Explore Related Simulators

Updated